PCB Module
On the basis of better chip sourcing channels, we manufacture LCD modules and kinds of communication modules such as low energy Wi-Fi communication modules based on ESP8285/ESP8266 series chips or AR9331, MT7601, RT5370 and RT5350 chips, 2.4GHz Bluetooth modules based on CC2540, enz., 2.4GHz Zigbee-modules, GPRS/GSM communication modules based on CC3200/CC2530 chips, enz. Besides, we usually provide PCBA service based on the modules as our clients asked.
LCD Module
Low Energy Wi-Fi Module
Chip Type | ESP8266-01/07/08/12S/12F (Hot Sellers) | |
---|---|---|
MCU Type | Tensilica L106 low-power 16/32 digits MCU | |
Wireless Standard | IEEE802.11b/g/n 2.4G | |
Port Type | GPIO, UART, SPI, enz | |
Transmit Power | -20dBM~4dBm | |
Key Features | Support TCP/IP protocol stack | |
Support WPA/WPA2 security mode | ||
Support Smart Config function | ||
Support STA/AP/STA+AP working modes | ||
Power consumption less than 1.0 mW (DTIM3) in standby status | ||
Support AT remote and Cloud OTA upgrading | ||
Built-in TR switch, balun, LNA, power amplifier and matching network | ||
Working voltage range is 2.4V ~ 3.6V |
Bluetooth Modules HC05/HC06 & HM10/HM11(Low Energy)
HC05/HC06 | Bluetooth Protocol: BLE V2.0+EDR | |
---|---|---|
Power Consumption: 3.3VDC 50mA | ||
Chip Solution: CSR BC417143 | ||
HC05 supports >30 AT commands, HC06 only supports few AT commands | ||
HM10/HM11 | Chip Solution: TI CC2540 | |
Memory Size: 256KB | ||
Support AT commands | ||
Working Voltage: usually 3.3VDC |